Aramid fiber packing braided from high quality Dupont aramid and kevlar fiber with PTFE impregnated
and lubricant additive. It is wear resistant but may damage the shaft is not used properly. A minimum
shaft hardness of 60HRC is therefore recommended.
Description:
Aramid fiber packing is braided from high quality Dupont aramid fiber with PTFE impregnated and
lubricant additive. It shows good chemical resistance, high elasticity and very low cold flow. It can
resist severe media and higher pressure. The packing is lubricated with silicone based compound
for quick and easy break-in.
ZT-P501L Aramid Fiber Packing With Insert Lubricant
Without impregnation, an extremely durable, highly abrasive resistant packing. It is an idea for slurry
service application.
Typical Application
- This is a universal packing which can be used for pumps in all types of industry.
- Chemical, petrochemical, pharmaceutical, food and sugar industries, pulp and paper mills, etc.
- A durable packing able to withstand granular and abrasive applications.
Prime Features
- It is wear resistant but may damage the shaft if not used properly.
- A minimum shaft hardness of 60HRC is therefore recommended.
- Superior performance
- Lower frictional factor
Technical Data
|
Material |
Dupont Aramid Fiber (with or without PTFE impregnated) |
|
Temperature Range |
-100 up to +280 oC |
|
Process |
Rotating |
25 bar |
|
Reciprocating |
100 bar |
|
Static |
250 bar |
|
Shaft Speed |
25m/s |
|
PH |
2~12 |
|
Density |
Appr. 1.4g/cm3 |
|
Do you want to know more about Zinotak?
